[PhoenixO]

Mathew,
No, no, you are just lucky and I wouldn't be surprised if your ShopCam CNC goes up in smoke like ours did.
We are a company in Peterborough, ON and we were taken by Mike Snow of ShopCam Routers, as well.
Michael Snow of ShopCam Routers, in Lindsay, ON, Canada, has scammed many, many people and our website will be going up soon. Dan Routhier, of Sign Savvy in Halifax is correct.
You can contact Michael Clark, manager of Security of Otis Elevators in the US if you like. He is a former FBI agent and has investigated many frauds. He states that Snow has defrauded Otis Elevators. Even a huge company like that was taken for over $20K, their deposit, just as so many others were.
We bought a 4 x 8 machine, received it, then the controller went up in smoke twice and he decided to take it back. He stated that, because of our problems with the machine, which was not built properly in the first place, he would take it back and replace it with a bigger table so that we could cut his vacuum tables for him. We were building a new shop so it worked out perfectly. That was in 2007. We have tried everything possible to get a machine or money back, to no avail. We are out $34K which he has and won't refund. He simply laughs at us when we contact us. He has a friend on the local police force and there are complaints to the Civilian Police Complaint Commission (OCCPS) regarding this cops actions.

It has been said that Mike Snow is a chronic liar and a conman. Our nightmare with this man has been since September 2007and we wish we had never set eyes on him or his machine.

There are more than 14 people who have been taken and the list grows monthly. There is a man in Brandon, Manitoba who recently received a machine and it hasn't worked since he got it. He is devastated because Snow will have nothing to do with servicing the machine. Rintal Canada, Cobourg and National Orthopedics have judgements against Snow.
If this isn't enough to keep you from even thinking about ShopCam Routers from Lindsay Ontario, then God Help You.
Jim