I have 2 Partners ( 1995 vintage ) that I have replaced the monitors with 12" LCD screens . The small screens are hard to find , but they are out there for about $99.
Look inside the control box at how the original Monitors are wired in .
Standard VGA plug , and a 2 pin connector for 120vac .
I made an aluminum box that screws to the front of the control where the orig monitor was , and have an acrylic sheet to protect the screen .
Not really a big job if you do it carefully . The F keys do not line up like the original , but you get used to it . I actually ran it with an old ( free ) computer monitor on top of the control box , and plugged the 120v into the wall plug , for a few months , but got tired of looking up so far . |