It is rare to see someone talking about a Motion Master. Not too many left out there. We have two twin table 5-axis motion masters that I have programmed with surfcam and run for 12 years. I love the machines, but getting support is virtually impossible, since they went out of business. I hear the main guy started another company in Texas, somewhere.
Does your z-axis plunge on the left table (M14) as well as the right table (M15) when milling in the Y direction? Does it plunge when milling in X driection?Also check your air supply to your z-cylinder, regulators, and filters. What about your leveling pads in the front and back? Are they loose? The last thing I would do is attach an indicator to the head, touch down on table, then run table back to check for level. |