For making boxes with finger joints, I'd buy a table saw and box joint jig. A really good new table saw will be under $2K, and will be just as fast if not faster than using a router,
If that Komo is not running, it can easily cost $10K or more to get running again. A tool changer and setting it up to control it can be another $10K-$15K.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |