I have been reading the threads about different CNC Routers and, like many other products, it seems to depend on an individual's. I have not purchased a CNC yet, but production is calling for it. I need some advice.
An opportunity has come up from a small engraving company that has a 4x8 Warthog about 10 years old(?) with a Porter Cable 3.5 hp router on it. The Router was replaced 3 years ago. The software was upgraded 2 years ago. I don't know enough yet to specifiy servo or other technical data. I have outsourced to them and it is clear that there strengths are in smaller engraving equipment. They are asking 7600.00 for the set up. They are willing to move it to my shop.
For my Company, I am not proned to purchasing used equipment. But I have seen this machine function and I have not seen any problems other than operator issues.
I have spoken with an experienced rep and he is willing to inspect it but he is not an operator.
What can I look for and what do I need ask? Any suggestions? If I do not purchase the Warthog, it is certainly available to anyone else interested and I would be glad to set up the contact.  |