You will need to make sure you select the correct DEVICE on the control as well as once selected, configure the baud, data, stop and parity. I recommend you attempt to send a part program from the control back to the PC 1st.
Please feel free to give me a call at our company for assistance. We also have RS-232 cables that do not require any soldiering or crimping. Plug and Play as they say.
We also have a CNC Editor Express for $250 that does all of the communications to the CNCs.
__________________
Greg Mercurio
Shop Floor Automations, Inc.
www.shopfloorautomations.com
(619) 461-4000 Tel
Last edited by SFA; 03-10-2005 at 01:00 PM.
|