hi fagor -todd
my machine is 'denford easiturn cnc lathe with a fagor 8020tg control' the machine was made 1989 / 1990 only about 2 or 3 of these machines were made with the fagor control.
the machine has servo motors , main spindle motor is 3hp & the machine is 3 phase
415v . i have been in touch with the makers here in the uk but they have on information on this control.
the machine had a barrafauldi 6 station toolpost but i had an accident with it & the chuck so it now needs to go for repair , so to keep the machine running i bought a qctp & holders which i thought would be a case of alter a few parameters & away it would go again
in the manual in m code details the mo6 tool change is not listed could this be why the machine stalls ?
i have no idea if there is subroutine that is for tool changing
thank you for your interest
robert |