How to make them Co planer without a big ass mill. I have 50' of thk rails to mount on my new machine i'm building and need to do it right the first time. Best method would be to haul the different axis's down to the local big ass mill shop and have it done. The base where the x axis slides will be mounted will be 3000+lbs. Not a easy or cheap task. Gotta be a better way.. How would one do this in a small shop with limited tools. Got a good dial indicator and caliper need a machinist level. What else do I need. Don't have parallels or guage blocks.
Any ideas. Be specfic please.
Donny
www.whiterivermfg.com