I too purchased the hobby cnc kit with the 200oz/in steppers, its a great kit and builds easy. I am hoping the motors will be able to drive my router which will have a travel of 24"x24" and 12" on the z. The machine will be made completly out of aluminum, 1" thick gantry sides and 8" of bearing span on the rails for the x and y. Using some of the formulas I've found her on the site the 200 oz/in motors shoud be sufficiently sized to drive this setup, so I dont think ur router should be a problem either. BTW, I am using 5/8 ball screws, with at 0.200 lead to get the max out of the motors. |