[Dwayne Foy]

[QUOTE1] I have three Cam packages Esprit, Bodcadcam, Mastercam, I have mainly been using Mastercam it is a older rev. 8.1.1. Don't have the money to buy newer rev. of Mastercam is there anything out there that is cheaper that will compare to Mastercam. Do alot of 3D motorcycle parts with engraving running Soildedge rev. 9 Soildworks 2005. Using Millright to do some of engraving.

Thanks
Dwayne Foy [/QUOTE1]