Thanks For The Input Guys. But I Was Really Hoping That Someone Out There Had First Hand Experience With The Fadal Emc. I Figure It Is Not Going To Be The Work Horse The Little Bully Would Be But Being Single Phase And On Being The Cheaper Side If You Can Call 40 Grand Cheaper, It Would Be A Nice Small Machine For A Small Single Man Machine Shop To Do Small Production Runs,some Small Mold Work And Prototype Work. I Have Looked At Some Used Machines That Come With Used Machine Problems For Not Much Less Money Then I Could Spend On A New Emc. I Know Everyone Has There Own Thoughts On New Verses Used. So If Anyone Has Anymore Input On The Fadal Emc I Would Appreciate The Information.
Thanks |