I am replacing the control to Numerix - I visited a guy who had his third machine upgraded with this control and his (very old) machines are running at incredible speeds. He is doing jet engines turbine blades surfacing.
This is when I decided to go for it, it is a very advanced control which gets rid of all the old DX32 remains.
Right now the guys from AMC are checking if the Heidenhain Encoder can be taken out too. For this they need a new version of the spindle's control EPROM. It is a Yaskawa Varispeed 626VM3C.
According to what they say, version 2829 allows them to make positioning with the controller and their software which can read the necessary data.
So this is what I am looking for right now, otherwise the upgrade is in final tuning stages, I will post photos.
If anyone needs the BMDC with the computer or IO boards, I posted them on ebay |