Thats strange here is a picture under that little box is the batteries.
your control has the holes where the battery box hangs from but no box.
Where the wires plug in on the right look for CX5X this is where the battery plugs in.
If nothing is pluged in there the machine may not have absolute encoders.
Im confused on a machine with absolute encoders the encoders always remembers the machine position so there no need to home the machine on start up. This is the way my cnc lathe works there no home button on the machine no need to ever home the machine.
But on my sharp 2412 I have absolue encoders witch always remembers the machine position but I must always send the machine home on startup .
most machines use one method or the other but not both.Can't figure.
Your control box has a different model number than mine my machine is a 2005 model what year is yours?
__________________
Tim |