Thank you for the response, my problem has changed since yestarday I was able to get rid of the emg alarm but now my mori seiki mv junior (fanuc 10m) says jog rset at the bottom of the crt as soon as I turn it on. it won't allow me to enter MDI ,EDIT ,MEM or HANDLE modes. Inside the electrical cabinet there is a single digit readout and it says "1". Also when I check the alarm message from the pc side it says alarm no. 36 machine ready off.I read a post by Al The Man yestarday instructing someone with the same problem on how to fix it but the post seems to be gone now. Also when I go to the diag. page and try to change modes I do see the numbers changing. Any suggestions would be greatly appreciated.
THANK YOU!!! |