I have been using Pro extensibly for more than ten years. I have used AutoCAD a little, I don't know Solid Works or Master Cam but know people that do. They tend to use other software because they are more accustomed to it. The good news is Wildfire 4.0 is more user friendly in the manufacturing side. Pro M went through several editions that were not so easy to use or understand. I use the Coach software anytime I have a problem or, their help files. But, I have had many week long seminars of professional training at the Pro training facilities that have been indespensible. They usually cost about $2500 plus your expenses, thank goodness my company paid my way.
ProM Wildfire 4.0 will do anything you need it to do.
Good luck, Terrence |