When I sent the program to the floppy it sent two programs O0005 and P0005
O0005 just looks a fanuc program although it was a conversational program and I can read it with wordpad, P0005 was garbage.
Do you think I have to format the disk, It is a 386DX control?
This is what I tried to load back into the machine:
O0005 (SPROCKET COVER)
(Conversational File)
(.250 ALLOY)
G20 G90
N1 G17 G68 X0 Y0 AA90.
N2
G99 F20.
P144 = .06
P199=1
G0 X0 Y0
P150 = .750
P153 = 0
G25 R.1 Z.260 Q.1 F20. V.06 G41 G3
N3 G1 F20. X0 Y-1.25 Z.1
N4 G1 F5. X0 Y-1.25 Z-.05
N5 G1 F20. X-.5 Y-2.
N6 G1 F20. X.5 Y-2.
N7 G1 X0 Y-1.25
N8
(END OF O0005) |