Geof,
Thankyou for posting these fixtures I think it is way cool. Sometimes I just stay in a rut and don't really think of better ways to do things. Often times suggestions I have made (at work) are hard to impliment because of a mind set of avoiding change which I have seen in different shops over the years. It is a breath of fresh air to see something creative like you have done to improve a process. It gets the gears of this old brain turning (52) which is nice to feel that way again. I know of one particular part I would like to attempt a similar improvement. This is why I like CNC zone so much and I plan to at least give credit where credit is due since I usually do not have much to input with the current frame of mind I have. I am trying to change that though! Good stuff Geof! |