[Andre09]

Before purchasing the K60MT, I was constantly looking for detailed photos of various Chinese Routers. It was difficult to get the kind of photos one would find useful from sales people in order to analyse the machine and see whether the design was to your liking. I was lucky enough to have been able to see in person an Excitech Machine(SHM 1325) here in Melbourne, and from then on, I was convinced about going the Chinese Route. Members of the forum such as Rocket67, Big S & many more have put up photos of their own machines which helped me immensely in deciding what kind of machine I wanted.

That being the case,its only fair that I post some of my own photos now that my machine has arrived so that others may also have a better insight into these machines. At the moment I can only comment on the physical appearance and build of the machine as power has not yet been connected. When I finally do get connected, I also hope to have the time to upload videos of my machine in operation, as this to me is the best way to get an understanding of a machines capabilities.

The photos in this post are of the machine structure and the different things that make up the machine. Enough talking, here come some photos...

Btw, I have not yet had the time to clean down the machine properly yet, so don't take too much notice of the dirt & grime. One of the slightly disappointing things was the that the machine wasn't very clean when it arrived. Things like the vacuum bed had alot of debris in the slots, such as electrical wiring etc.. There is also a paint spot on the bed and some oil, all of which is not a huge problem, but when you get a new machine, its a lot more pleasant to see it in a new state....