Hi Pat,
Can u Attach a sequence with pictures or Videos on how you use a DTI.
(also u can mail me at -
ashish.bhosale@yahoo.co.in)
May be i am missing something. As u told it reduces the Time, i believe that it will take the Same Time.
I guess the Dial tip is like a wiggler, so the operator has to jog at the centre.
I apologize if i am wrong.
Also Coming to the Issue - IS HOW WE CAN FILTER THE ANGULAR ERROR ?
Is there any special Instrument like Boring Bar Presetter or CMM Machine. But still the error is that u don't know whether the locks ( provided on the tool holder to clamp in the spindle ) are parallel to the Machine Axis or not. SO EVEN IF WE ALIGN THE DIAL ON CMM MACHINE BY PICKING UP AN REFERENCE OF THE SIDE LOCKS, THAN TOO HOW WE CAN BE ASSURE.
Also i guess we need to talk to the Machine Manufacturer fo the Same.
I have attached a snap to identify the Side LOCKS.
ASH
Thanks for your Time, Support & Patience.
Still Needs a Sound Correction.
