Those are not very desirable motors, due to the high current rating. Geckos only handle 7 amps, which would only give you about 2/3 of the rared torque. And if you're only going to get 200oz of torque, you could get a Xylotex or HobbyCNC driver AND 200-250oz motors for probably less than the price of the geckos.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |