Thanks for the review. I went ahead and installed the DBI with EMC and right off the bat my CNC Router worked with jogging (did not have to set pins or even flip axis), and the spped control is great, it is a good looking cnc program and i believe i will use it instead of other, the only thing i have to figure out is the TPI i use a 1/2" threaded rod and it has 13 turns per inch and use 1/2 step on the hobby cnc board. I think i need to figure out the number somewhere in the EMC.ini file....
any help is apriciated.
How many do we have running Linux EMC????
Thanks, Joe |