Originally Posted by MrBean I don't think the microstepping settings will change your motors torque. It certainly won't improve it. The main reason for microstepping is to reduce motor vibrations. It also increases your resolution and the amount of step pulses required to move the motor any given distance.
Regards Terry..... |
Microstepping really doesn't increase the resolution. This explains it beter than I can. http://www.machinedesign.com/ASP/vie...strSite=MDSite
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |