Check McMaster Carr, http://www.mcmaster.com page 958
36" 3/4 = $36
24" 3/4 = $25
12" 1/2 = $8.50
Around $140 for all six. Or try to find them on Ebay.
Buying a machine will cost probably at least $1500-$2000, I would think.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |