Originally Posted by dvdlock  ... So if anyone has any pointers as to where/how to identify the output for the blow function in Lasercut it would be appreciated. |
According to MPC_manual.pdf the output for 'Blow' is on pin 1 of Y1. (Page 9) Also, there's a mention on -page 10- of Jumper3: "JP3: Note: JP3 is related with Y1. If output Y1 to drive a 24V relay, the jumper should be connected to Pin1 and Pin2. To drive a 5V relay, the jumper should be connected to Pin2 and Pin3. If the jumper is removed, Pin6 of Y1 not connected." That might be worth a look, always assuming your Lasercut is controlling an MPC6515 board? Bob (sorry about no LF/CR, something seems to be stopping me putting them in!)