Originally Posted by ger21  Everyone wants one, but $3000 is a LOT of money. You also need to factor in the tool holders and collets, which will run about $150 per tool. So 6 tools brings the price up to $4000.
You just need compressed air to release and grab the tool. You'll need some type of solenoid valve to control the air going to the spindle. |
If you buy from flee bay 3k is about right, with some research and illingness to do some leg work you could save a fair coin
but still a very large investment $ required.. i seen tool holders for 99 bucks...
depends on what you need for type..
keiling could not give and help as to how the system works or if his atc had a built in actuator in them....
sad...