Here's the next installment. I was able to get all my holes drilled for the 5/16" carriage bolts that hold the frame together. They also hold the rails on. Everything came out as square as I can measure. I had it leveled up in the picure and the frame is dead level. The rails tightened up great as well too. I am a happy camper at this point.
I had originally intended for the machine to sit on this stationary table in the corner of my shop. Now I know that it has to be on casters. All sides of the machine will need to be accessible at times. Plus a steel framed base with casters will actually have less of a footprint.
I ordered 4 casters from the
Surplus Center. They had what looks like a great deal on them.
Here are a couple of photo's so that ya'll know it did happen.
