Originally Posted by Alan Bradford  Hi Ryan,
Yes you are probably right.
This is not the right forum for this type of THC.
It is intended for the industrial market, where they cut 2-3 shifts a day.
The hobby class of machines that most use in this forum are not suited for the AVC.
Most already have a stepper Z axis and adding a precision THC is easily added to the PC and Stepper. Most of these machines are rolled sheet metal and use cheap unshielded drives. The big High Frequency plasma units would shut down the drives and Computers.
The industrial market has lots of machines that have multiple Oxy Fuel torches.
They are used for adding Plasma Torches to them. This type of THC is well suited for the 100-200 amp plasmas that cut 1/4 to 3/4 inch material all day long. Thats who I am looking for.
Thanks, |
That's who I though you were targeting. This forum is mostly DIY'ers like myself. But even for industrial plasmas, don't you still want a better resolution on your arc volts?