 Congratulations! | |
Neil, Congratulations on your new machine. We also have an Excitech 1500 x 3000 machine - It is a ripper. Did you order it with DSP or Mach3?
It was unfortunate that you happened to get the container with the grain in it. When our Mustangs arrive from the USA, AQIS have made us have them Steam Cleaned every time. At added cost of course! Funny how they still arrive with cobwebs everywhere underneath. I know that we must keep foreign insects out of this country - but i still think it is a rort among the waterfront crowd!
When our first machine arrived, it was also in a sole use container. I posted the Port charges in the Excitech thread. Would be interesting seeing a comparison? Any possibility of you posting your charges at this end of the shipping?
You say the Quick machine is still going strong - so is our Excitech. I am sure you will be happy with it. The Chinese generally have a reputation for not answering queries after delivery of machines, however i do believe this is changing. As their machines become more widely known around the world, and on Forums such as this, they are realising that there is a responsibility on their part to maintain good customer relations. Quick CNC have been very fast in answering any questions i have put to them. My contact at Quick has moved over to them fairly recently, and is very customer focused.
Thanks for sharing your story - i hope you post regularly.
Rocket.  |