Gentlemen,
We are disappointingly, and embarrasingly late on getting the new 2000 series drives in people's hands. As far as I know, the issues that remain to be completed are the tuning software and the DLL.
The 2000 series will replace the 900H series, which will gradually be phased out of production.
The brushless drives will not be the first drives to be replaced. As far as having brushless drives with the 200 volt and 40 amp rating available, no date has yet been set for them. We don't know what the market will call for either.
Please check the features listed in the introduction to the 2000 drives on the Rutex.com web site.
We expect them to be priced about the same as the present drives.
I don't want to make any more projections on when they will be complete, but I expect to have my stock of 990H's replenished in a week or so. In the mean time, I'm taking a trip to the east coast to see my new grand daughter, so after Tuesday, I'll be away for a week.
Tom Eldredge,
Rutex, LLC
__________________
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
|