[bigz1]

I have created a program that uses a VBit in the floating head to create the pattern in diagram. I am using BA intersection where the line hits the larger V in the panel and machining to the base of the V and then returning the tool along the same path to the tip and vice versa on the other side. The code looks good and I have even checked the Zoom in Draw. Unfortnately the tool stray slightly when it reverses back up the path. I am not ruling out mechanical problem but it has no problem returning down path when moving in only one axis. Your thoughts would be appreciated.

Also I would like to know how to to change spped settings in the axis. I have been typing in my changes followed by enter. Exiting out and typing CNI in password but my changes dont register?