Wrong, it's the same exact link, your just up to your old tricks again!
Ok, so you're back over here, from the forum next door, and you found out that you have been busted by the moderator for dishonestly injecting the above link into my quote that you posted. (refer to your post # 9 ) and it was deleted. You guys do this quite often over on your forum..
So in your last post you link to the very same thread that you injected into my quote. I checked it out and it is about a member that bought a Smithy CNC lathe and he was having trouble with it. He doesn't return to say if the problem was resolved or not.
So this makes me think that for one, you guys are all about making Smithy look bad, so then maybe you can convert someone asking questions here, to one of your customers.
I don't own a Smithy machine, so I can't comment about them good or bad, but at least Smithy has paid for an ad on the CNC Zone. And they have a variety of different types of machines to choose from.
Here is what I recommend you should do:
1. Buy an ad from the CNC ZONE to advertise your machine.
2. Don't hide behind phony screen names, to cut down your competition, then try to sell your machine.
3. Have an actual real live company representative, posting on your forum, using his real name and having a signature with his work phone # and email address.
4. Drop all the phony screen names you have been hiding behind. You represent a company, start acting like it.
5. If you have an unhappy customer posting unfairly about you, and since you have done everything in your power to resolve the issue, get help from the moderator, Don't send your phony screen name attack dogs to harass the guy. This really degrades your forum and makes you guys look screwy.
I believe if you take the above advice, your image will definitely improve, and you will get more respect, and you sure will impress me and others. And maybe even sell more machines. That's why your here, isn't it.
Good Luck
Flathead