Hi folks
This may be a bit off beam but I have just come in from spraying the roses and wonder if the common garden sprayer would be a quick way of achieving a mister? I don't have - as yet - an air compressor hence the question. Obviously a new clean sprayer would be needed as the 'roses' would die if sprayed in oil and I might die if the residue of the bug spray is still in the one used in the garden - hence I would need a new one for CNC.
Guess the day is fast approaching where I invest in a compressor - currently these are about four times the price of a garden sprayer. Just need to convince my wife as a compressor is too big and noisy to kreep in via the back gate!
Thanks Al for the link to the mister hope to read reports that the design is good. The drawing and the picture are just the ticket for a home brew.
Good luck at dispelling the fog.
Regards
Pat |