Edwardo,
The day after we purchased the DT someone called me and asked which side I wanted the machine to home to (I think it was Russell). We figured I needed a "left home" configuration. I noticed that the machine morvaman was working with is a "right home" set-up. I think that is the difference (?). The red sheet metal is a guard, it is slotted up on top for at least an inch adjustment. This section is were I have spent the most time with aligning. I ended up removing the fender washers and replacing them with a 5/8" shaft collar. The hole in the aluminum support is right on tolerance, so I thought the shaft collar would fit better and straighter. Free hand it moves like butter. I have not tried them with power yet! I am afraid to jump steps because I may never get back to the stuff I missed. |