WSS, looks like you are almost there. I am curious to see the dual torch holder. The thought of oxy cutting has crossed my mind. I will be looking to learn from you. Thanks for posting the pics. I was curious if Dynatorch had made any changes in the attaching hardware (motor mts, guides, etc) when they upgraded to the all steel gantry. One thing I can see is that the motor mounting system is much more rigid on the steel Y axis carriage than the aluminum one I have.
Hardware wise it appears everything else is the same as the extruded aluminum gantry I currently have. In my upgrade I will have to fab some new motor mts to make the dual drop design work. Thanks for posting , keep the pics coming! |