I have just read my conversation with Jerry again and it seems I have missed some point in what he said
"No need to convert. Now the DSP system and Mach3 are both available.
For the Mach3, it has a card needs to be pluged into the electronics box
Therefore, the electronics box for mach3 and dsp is different"
If I got it right from the second reading it means that SGH0609 model suplied ready for Mach3 but you will need to add something to it to get it running under Mach3. I am guesing that it means a Mach3 control box and some card(board) must be added to electronics box by a buyer and they are not supplied.
I am new to CNC Routers can somebody confirms this.
I will ask Jerry to explain this too. |