Lucky for me you missed out Nervis.
There was a Fadal 4th on ebay with the board (plus a spare) listed at $5G - used twice!
My VMC is 1 of the last DC units (I believe yours is DC as well) and this 4th is DC - model is VH 65 (as far as I can tell it is identical to the 165).
My machine HAD a 4th and came to me ready to rock by just adding a table.
After the ebay auction ended I bought the rotary unit for $2400, I am still working on shipping it here.
I have no experience using or programming 4 axis but my VisualMill 5 CAM is 5 axis software, so I am going to learn.
I am missing the jumper cap that goes in the plug on the machine(somebody jumpered it through using little bits of wire) SO if anyone has an extra proper plug, I am interested in purchasing one.
__________________
www.integratedmechanical.ca |