lclore,
I bought a Thermal Dynamics (cutmaster 81...60 amp) unit about three years ago and Im very happy with it. Although it is my first plasma cutter, I dont have aot of personal comparison with others. I was cutting 1/2" steel yesterday with no problem (by hand w/ straight edge). I put a square on it afterwards and almost no bevel at all. Alot of people I see on here all have Hyper units, I still have yet to see one person with a thermal dyn. Im not sure what that means but my unit cuts very well. I see you are going to be cutting alot of alum. I did a huge alum. job last year for epcot out at disney. I was rippin through the alum. w/ no problem and needed very little edge cleanup. Hope my feedback helped.... here is a couple pics for you guys. |