Originally Posted by jjjr40  Finnally got the machines plugged in,
The first one is a dart800chr 2001 with a 6 posistion toolchanger on the left hand side, this machine just needs some TLC and some new nylon grippers for the tools.
The second machine is a Dart800CHR 2002 with a 9 posistion toolchanger on the Y axis however this one has an issue, after having done some electrical repairs all xyz axis will move beautifully as new.
Does anyone have any info on the following issues
1, Machine will not automatically size up (error - Time out rising router)
2, Manually moving the toolchanger causes the machine to trip out
Controls
NC500 controller with a RTU500 PLC
Thanks
John |
Fixed machine wrong software was loaded originally