I would bet a dinner that the explorer is series 1 CNC iron. The same iron used on the BOSS series machines (3,4,5,6,8, and 9). I do not believe the X travel is extended (still 18 inches). I will check the book tomorrow. What is different is that it has the PC based DX32 control with a color CRT. I installed 3 in schools and one at a plant in MS quite a few years ago. The X axis travel was extended on the BOSS 10, V2XT and the EZTRAKs. All these had series 1 iron. NOT series 1 CNC iron.
George W. |