If I start at X 2.155 Y 2.155 Z-.125 and I want to go to X 2.349 Y 2.349 Z -.3865 while following the .219 radius will this work??
G91G2X.194Y.194J.194Z-.2615
G3X-.194Y-.194J-.194Z.2615
Where does the radius call out go?
Sorry I am failry new to all this, and I have no cad software to work from. I learn as much as I can by writing them by hand. But I am running out of time to complete this project.
Thanks for your help!! |