I have retrofitted 8 various size techno esel cnc router. Both the Servo and the stepper types. When you decide that you want to use a good program such as Mach3 and modern drivers contact me at
dmauch@camtronics-cnc.com . I can provide a modern solution at a fraction of the techno esel prices.
I am currently building a control unit for the University of Pennsyvania. They are shipping me their motors and cables. I am building a 4 axis control unit for them using the burn out proof G203 drivers in my nice small case and will provide them with a config file for Mach3. Contact me if interested.
Originally Posted by Tsooko  Attachment 83214
Attachment 83215
Hi all
Sunday morning and we still haven't got any movement from the Techno Isel but that is not the machines' fault.
Arn upgraded the software to win98 and we now have a memory address problem. Seems that there is not enough memory to load the dos based software or win98 is not recognizing the software or visa-versa. He will figure it out or I will get the new controller system, which I plan to get anyway. We have more time than money right now. If this takes all summer that's ok. I got a digital camera so here are some pics.
Ted
If you are going to be a Bear... be a Grizzly! |