[Bryscnc]

This is my first post, although I been reading posts for a long time.
I come across some German servo motors and I need help on whether they will work. I know they came off a conveyor system. The ID tag reads: PM MOT, TYPE 13 121 65 5 2 6, Nr. 1/9906/2547, 370 W, 3000 1/min, Errg. PM V, I max. 11.2 A, Anker 180 V, 2.5 A, Ff 10, IP 44 . They have encoders or tachometers on the backside and are connected to a reduction gearbox. I have a southbend mill 9x49 that I want to convert to cnc. I would like to know what kind of torque or power they have, then if they will work, is there an inexpensive drive that will handle the 180 volts required.