Originally Posted by RotarySMP KellyCAM is the worst pulse train generator I have tried, so using their DLL is probably not a great place to start. There is a reason many G code interpretors are still running on DOS, and that Art went great length to get control of XP for his Mach2.
Sorry. |
I realize that it is not the best option, but I'm using this as a learning experience to "enhance" upon. I'd still like to find out what I'm doing wrong. KCam can move the motors about 5 ipm, where I can only get a 1/10th of an inch if that.
Thanks for the feedback anyway.
Darren