[dwwright]

Hi all,

I've been playing around with creating controller software in Visual Basic. I've had good luck in creating a Jog controller that works. I can get all the motors to spin in the correct direction, however not very fast. I've played around with several different timers from milliseconds to microseconds, to nanoseconds, but I can't seem to get the same speed that other controller softwares are getting. The dll I'm using is the same one that KCam is using for interfacing the parallel port. Does anyone have a good idea what the pulse width should be between steps? I'm betting that it has something to do with this, but haven't had much luck.

Thanks,

Darren