01-27-2005, 06:22 AM
|
 | Community Moderator | | Join Date: Mar 2003 Location: Shelby Twp, MI....USA
Posts: 20,441
 | |
STLWork, $75 at http://www.cadcamcadcam.com
Millwizard, $250, at http://www.millwizard.com
DeskProto, ~$1500 http://www.deskproto.com
I personally prefer MeshCAM. They all have Demo's to try, though.
__________________
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |