[g-codeguy]

Originally Posted by dcoupar Not on any Lynx that I've seen... but I could be mistaken.

I venture to say that this is one of the few times you have been wrong!

We have 3 Daewoo Lynx lathes with 21i-T controls. They all have the white button that has to be pressed first. We also have 3 Daewoo 200MS lathes with 18T controls that also have it. We have an old Daewoo Puma 8 and a Daewoo 200S that all have a button on the control that has to be pushed first. The Puma has an OT control and is set by MZ0 INPUT...after you press another button on the control first. Otherwise you won't get the correct workshift.

Never seen a Daewoo that didn't have one, but then these are the only ones I am familiar with as I've never worked in another machine shop.