Our company has purchased VMC 2016L a little over a month ago, and every morning when we boot up it gives us an error cannot upload firmware (byron dr card) or motion card error or something else. Point is, they told us that there is a new version of the software is out and that should take care of errors. well that was a week ago since service guy has been here to download the patches and we are having same problems. How many places stay in business very long with this type of product. Fadal needs a little more time in the testing stages before they put a new product on the market that might put future business on the line. Now, I like the possabilities of the new control, but they definetly need to do more R&D on their products. I have heard from the service guy that if you have the 4th axis with this controller (big problems) as it sounds like most of you are having. I guess I'm lucky in some repect we only do 3 axis. OK OK I'm stepping off the soap box..... Just call me frustrated in Illinois.  |