To respond. I've worked with lots of programs (computer professional by trade) and have done lots of reading on MasterCAM over the past year.
Although I am not a machinist, nor am I proficient at MasterCAM (yet), the only time I have heard of someone having a problem where MasterCAM would not load after installing WinXP SP2 is when they were using the SIM crack.
I was only giving my experience in that I have not had any problems RUNNING MasterCAM 9.1 SP2 on WIndows XP with SP2 installed. but, I'm running a legitimate copy.
So no I'm not a MasterCAM guru, but I was able to give some information on what I have seen and read. |