12pt nuts are big in the racing and aerospace world. I emailed BG, and they said my order was too small (200pcs) They must deal with massive orders like1,000+ minimum or something. I might just have to have these machined. The thing is, I dont know what corner radius to put in between the points or what angle the base of the 12 point is where it goes into the flange part. At my old job, I milled a ton of 12 point wrench ends on these MP-35N parts, but I cant remember the radius of the tool to put the finish on the 12 point crown.
__________________
"We can't solve problems by using the same kind of thinking we used when we created them", Albert Einstein Thinking outside the box 24/7........ |