Originally posted by jemmyell
I replaced my vendor's MS-DOS software with Mach1. I kept breaking .031 Mother-of-Pearl bits due to acceleration issues. Mach1 gives me very fine control. I haven't broken a bit since switching to Mach1 and tuning my system up. Mach2 will probably be the future of all small shop CNC control systems when it is combined with Gecko 2002. That should be about 8 months away. Yes, I'm another VERY satisfied customer!!! |
Yeah. I just hate it when I break a $25 bit !
Or even worse when you have one break off and ruin a $60 piece of stock!
I find it hard to believe that anyone who tries out Mach1/2, will be dissappointed!